The resolution outputed on the extended monitor isn’t clearly 1920×1080 (a bit smaller and blury..i’m using a hdmi to vga adapter), and when I change the resolution on the principal display on the extended one it changes also (it shrinks if i shrink it)…i should stay the same (1920×1080) but it doesn’t.
If I use an older monitor with a smaller optimal resolution (1680×1050) it works just fine.
Solution: updated video card driver and all worked fine for this guy…
BY DEFAULT, WINDOWS LOADS THE MOST BASIC OF VGA DRIVERS DURING SET-UP, FOR COMPATIBILITY REASONS…TRY VISITING THE WEBSITE OF YOUR CHIPSET MANUFACTURER FOR THE PROPER DRIVERS, AND I MEAN INTEL, OR AMD, NOT ATI…THEY SHOULD HAVE THREE CATEGORIES OF UP-TO-DATE DRIVERS FOR YOUR NEEDS:
#1: CHIPSET DRIVERS. These are to support your onboard graphics and processors accesses to the chips.
#2: video drivers. These are the ones you would need for your O.S.
#3: PROCESSOR DRIVERS. THESE WOULD UPDATE YOUR BIOS AND MAKE BETTER USE OF THE PHYSICAL INSTRUCTION SETS EMBEDDED IN YOUR PROCESSOR… Download and install all of the ones for your system, and you will be able to remedy your problems.
Another guy said:
Hi. I am running Windows XP. I bought a TV monitor with 1920*1080 optimal resolution. Of course I had a bad result however I downloaded and installed drivers for my graphics card. I installed also the software for the TV and voila problem solved. I can be failrly certain that it is all down to software issues and/or settings. Hope this helps